Features
Suitable For: PCB press molds drilling, pcb testing fixtures drilling, speaker meshes mold drilling, precise holes drilling. *
- With torque sensor to automatically withdraw the drill to prevent drill broken (patent pending.)
- Arbitrary drilling depth setting for blind hole.
- Drilling hole 100% perpendicular to work-piece surface.
- With software for mirror-effect drilling.
- Several parameters available to adapt different material
- Large memory buffer for 10,000 holes data and 999 drill-speed
- Co-operate with CCD, JOY Stick and inner cross hairs to raise efficiency and accuracy.
- Save home position automatically during power failure
- RS - 232 Interface to link with personnel computer
- Ball screw and linear guide to raise the accuracy
Spceifications
X, Y, Z Travel: |
450 x 500 x 70mm |
Work Table: |
540 x 660mm |
Max.workpiece loading mass: |
300kgs |
Machine dimension: |
1570 x 970+500 x 1880mm (L, W, H) |
Machine weight |
About 2000kgs |
Z Motor: |
AC servo motor 400w |
X, Y Motor: |
5 phase stepping motor |
Spindle rpm: |
600 – 7000 rpm |
Repeatability: |
0. 0005", 0.01mm |
X, Y movement speed |
250 – 4000mm/min 10 steps |
No. Of points to be saved: |
Max.999999 points |
RS – 232 interface: |
1 port |
Power: |
AC 220V/5A, 1 phase (50Hz /60Hz) |
Lead hole capability: |
∅0.6 – 4 mm (YK 30) |
Z Travel feed rates: |
1 – 999mm/min (pull up while torque overload) |
Control: |
PC based (MS – DOS) with TFT LCD 10.4" VGA monitor |
Collets: |
ER 16 ∅ 1,1-2,2-3,3-4mm each set |
Moving control: |
Keyboard & electric hand – wheel |
Coolant pump |
Yes |
Tool box |
1set |
Color CCD camera, 25x lens & image display card |
Yes |
Joy stick |
(Optional) |
Photo – scale resolution 0.005mm |
(Optional) |
|
