The Bungard CCD/ATC is a high quality Computer Controlled Drilling machine with Automatic Tool Change. It allows direct processing of Excellon/Sieb&Meyer drill data or HP/GL data for PCB production (drilling, milling, isolation routing) and milling/routing of plastics, aluminium or other metal panels

Extend of Delivery

• Mechanics unit
• Control unit, full set of cables
• High speed, long life spindle with quick stop brake and load control
• Automatic tool change, simultaneously 16 out of 99 tools per job
• Integral depth limiter and pressure foot
• Windows driver software RoutePro 2005 for drilling and routing
• Powerful 500-1500 Watt (adjustable) vacuum cleaner, remote controlled

• Mechanics unit: rigid and flat construction with low moving weights and high quality bearings for high-speed positioning
• Machine bed with universal fixture system, suitable for clamp or span fixing or for reference pins (fiducials)
• KaVo high precision spindle motor, 150 Watt, 60 000 rpm, with heavy-duty long-life bearings, including 1/8" (3.2 mm) chuck
• Software controlled spindle speed. Electronic spindle load control with software feedback
• Spindle quick stop (1s) DC brake and speed-up booster
• Heavy duty 2x2 phase high-torque stepper motors on all 3 axes for true milling capability and correct tool speed
• All X/Y and Z traverse speed, working speed, working depth, spindle rpm and depth iterations individually configured on a per-tool basis, resulting in:
• Always adequate cutting speed over the entire spindle RPM range, no need for 100 K rpm spindles, no excessive wear to costy spindle bearings
• Standard travel area: 325 x 495 x 37 mm (larger machines available)
• Automatic tool change, simultaneously 16 out of 99 tools per job
• Drill break detection and length control
• Smallest tool diameter: 0.1 mm (micro end mill at 60 000 rpm)
• Max. hole diameter: infinite
• Integral depth limiting device for isolation milling and engraving on uneven surfaces, work level setting by Z stepper motor, depth fine adjustment with micrometer screw
• Removable, spring-load pressure foot for drilling of flexible and uneven PCBs
• Stack processing of several boards at once (typical stack: three 1.6 mm thick boards plus one underlay/base sheet)
• Working depth not limited by depth sensor, only by tool flute length (standard: 5..10 mm)
• Uses all common PCB drills/mills with 1/8" shank, with industry-standard length setting by collar
• Board fixture by "fiducials" possible at no extra cost, using standard base sheet material
• Possibility of mounting boards to machine zero point. Clamp fixing devices included with machine, span fixing for heavy-duty milling is possible
• Vacuum board fixation not recommended due to problems with board penetration by drilling
• Stand alone control unit connects to all standard PCs with 1 free USB or serial port
• Fully integrated Windows (98..XP) driver software for Excellon, Sieb&Meyer or HP/GL data for real-time, on-line machine control, with comfortable user interface, including full tool management and plausibility control
• All machine parameters (speeds, acceleration ramps, X/Y/Z dimensions, scaling, tool change positions, drill detection level) software controlled and configurable
• Easy to use teach-in feature for drill data
• Step definition: Software selectable: 1 mil, 1/2 mil, 1/4 mil (= 6.35 micrometer)
• Resolution: 0.1 mil (= 2.54 micrometer)
• Precision +/- 1 step
• Positioning accuracy over entire workspace: 20 ppm (0.002%)
• Maximum traverse speed per axis: 130 mm/s
• Maximum working speed per axis: 130 mm/s, individual setting on a per-tool basis, independent from traverse speed
• Drill speed: 5 hits/s (=18000 holes per hour)

• Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500W)
• Sizes (mechanics): approx. 70 x 80 cm
• Required desktop size: approx. 120 x 80 cm
• Weight: approx. 32 kg

Compressed air required for auto tool change Computer not included

Avalilable Options

Protective hood, CAM / isolation software, monitor + camera, cooling device, compressor, etc