This line is to form the patterns on the panels by chemical treatment, whose configuration is Developing + Etching + Stripping. Developing and Etching module with our rotary spray system are readily achievable high etching factor to a fine pattern. It can be used a chemical, CuCl2 and FeCl2.\
The solution can be sprayed onto the panels vertically to avoid side etching. We can take a uniformity panel surface since the solution is moved very quickly to out side by centrifugal force.No review.
Manufacturer: Process Advance Technology Ltd, Taiwan Desmear / PTH
It supplies a series of PCB wet-process equipment ranging Desmear/PTH, as well as automatic panel loading and collecting devices.For processing thin panels and panels with tiny holes, PAT takes special measures to do the loading and bubble removal in order to improve yields.No review.
Manufacturer: Luther & Maelzer, Germany. Universal Tester
In this process each and every finished PCB’s are tested to detect open / shorts in the circuit.
This tester is the ideal tester for high volume testings. With this machine up to 1200 boards per hour can be tested. It stands out because of its very easy handling and operation through its ergonomically designed user interface. Besides the speed and precision, the ease-of-use was the main achievement for this machine.
It accepts board sizes of up to 12.8″x 9.6″, covering a wide variety of different bare PCBs. This machine can either be equipped with a Mechanical Feeder, or with a Vacuum Feeder for less strain on the PCBs. A transport unit and a Double Restacker are also part of this automatic test system. Other options include an Optical MicroAdjustment, a Cleaner or a Triple Restacker. Three different grids of measuring electronics – 100mil 70mil 50mil – are available to enable the machine to test even the most complicated boards.No review.
Manufacturer: Process Advance Technology Ltd., Taiwan. Electrolytic Plating Line (PTH)
PANEL and PATTERN as well as automatic panel loading and collecting devices.For processing thin panels and panels with tiny holes, PAT takes special measures to do the loading and bubble removal in order to improve yields.No review.
In this process panels are cleaned, flux coated before HAL and then panels are soldered after solder mask process then post cleaning is done.
Hot Air Solder Leveling Systems Lantronic Hot Air Solder Leveling Machines are built to the highest standard. Features of the machines are imple operation and maintenance procedures and there is a model to suit all sizes of manufacturers
The complete range of Lantronic Hot Air Solder Leveling Machines is designed with operator safety and comfort in mind. All machines are fully covered with stainless steel interlocked doors and a safety window which closes during operation. All covers are easily removed to allow access for cleaning and maintenance.The specially designed board clamping system eliminates the need to punch holes and the fully adjustable air knives will leave the finish that you and your customers require. Lantronic developed the “TRU TRACK” system for supporting both top and bottom of panels, processed at an angle at 45 degrees for a super flat surface mount finish.The range starts with compact relay controlled machines and progresses through to sophisticated PLC-controlled models. To complement the range of HASL machines there are horizontal pre-cleaning, fluxing and postcleaning lines available.No review.