Maskless, Beam – overlapping method. Applicable to next generation PWB processes
Hitachi original high – speed RIP (SRC) and light source provide long – lasting uniform light intensity and are capable of high – precision exposure
Measuring the distance between 2 targets, the machine splits the difference from its theoretical distance with center base, and determines the drilling positions. Drilling at the target center is also available.
A quick and easy way to measure and check drill diameters, the Optech M1 uses a non-contact measurement system to avoid damage to the cutting tool. The unit can also be connected to a stand-alone printer or via an interface onto a personnel computer.
The MDP 10 utilises proprietary technology gained from manufacturing to offer a micro drill repointing solution and is particularly suited to our undercut series of drills. Used exclusively by our re-point and service partners, these machines ensure point perfect reliability.
The RLM is a dry film laminator especially made for small companies, schools, research and development departments. All commercial laminates for PCB manufacture and mould-etching part technique can be processed. Due to adjustable pressure control and adjustable laminating speed, solder mask application is also possible without problems.
The E497R is a PC/104-format digital I/O module available in two configurations: 48 I/O TTL channels and 16 High-Current Outputs and 16 Optoinsulated Inputs. Both configurations contain two 82C55 ICs, each having three 8-bits software configurable I/O ports. Each 82C55 has its own 50-pin I/O header for external connections. The ports direction can be selected by programming control registers built into the 82C55 chip. The I/O headers are organized to allow direct interfacing to OPTO-22 standard.
Manufacturer: Luther & Maelzer, Germany. Universal Tester
In this process each and every finished PCB’s are tested to detect open / shorts in the circuit.
This tester is the ideal tester for high volume testings. With this machine up to 1200 boards per hour can be tested. It stands out because of its very easy handling and operation through its ergonomically designed user interface. Besides the speed and precision, the ease-of-use was the main achievement for this machine.
PANEL and PATTERN as well as automatic panel loading and collecting devices.For processing thin panels and panels with tiny holes, PAT takes special measures to do the loading and bubble removal in order to improve yields.
The Ellipse 12 is an All-In-One LCD PC based on an embedded PC architecture which mounts a Celeron® M Processor at 800MHz. As integrated LCD PC, Ellipse 12 can be used as stand-alone PC or Networking Terminal. It integrates a 12.1″ TFT display with 800×600 resolution 16.8 mil. colors, allowing an extended visual area and with the option of Touch Screen it is suitable for any kind of interactive applications. With up to 1GB of System DRAM and 256 Kbytes Cache, ELLIPSE 12 supports the most common Operating Systems: Windows XP and Linux.
The M671R is a new ETX™ CPU module designed by SECO, paying attention to customers requiring very high performances. The module is based on the Pentium® M CPU up to 1.8 GHz frequency, with Chipset Intel® 855GME (Intel® 852GME on the CM 600 MHz version) and front side bus at 400 MHz. The chipset has an integrated 2D/3D graphic controller, supporting AGP4x interface. An important feature in this module is the LVDS interface at 18bit Single and Dual Channel. The module integrates also Audio, Ultra-ATA/100 IDE interface, 1 Ethernet 10/100 BaseT, 4 USB 2.0 ports, 2 Full modem serial ports, 1 standard parallel, keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. The ETX™ module is connected to the rest of the embedded system through 4 high density connectors that carry both ISA and PCI bus signals to a motherboard, where I/O connectors are placed, according to the customer requirements.
The M600R is an ETX™ baseboard designed to be the startup for any customer that begin to valuate ETX™ board’s charateristics. M600R has two different set of connectors: front panel connectors (PS/2 mouse & keyboard, USB, Ethernet, Parallels and Serials, VGA) and on board connectors (ATX Power, IrDA, PC/104 and PC/104 Plus, PCI slots, Floppy Disk, Hard Disk, LVDS, Video Out).