The M647R is a compact general purpose baseboard designed to be an easy solution for the use of ETX™ modules. With its CC-Talk interface it’s also suitable for gaming applications. It’s possible to mount on board up to 512MB Flash Disk modules. The M647R is well equipped with 2.5″ HDD connector, LVDS, VGA, 4 USB and Ethernet ports. The board can receive + 12V power supply directly through a Molex minifit connector or through a Kycon KPJX-4S connector plus relay and remote power button.
The M682R is a compact baseboard designed to be a solution for the use of ETX™ modules. With its Mini PCI socket soldered on board it’s also suitable for applications that require Wi-Fi connections. Its very small dimensions are also the main characteristic that enables the use in wide range of products of ETX™ CPU modules.
Professional equipment for laboratory prototyping of through-hole plated PCBs up to 210 x 300 mm size. Clean system including built-in rinsing compartment. Maintenance free and made for easy processing and handling. This particular machine type is optimized in terms of space requirements and costs. Compacta L 30 is suitable for the Dexter 3 D process (known on the market as the ABC chemical system). Bigger and customized units are also available (see our web site for COMPACTA L 400).
JTAG/Boundary Scan is probably the most ingenious test process, which like ICT, tests within the circuit and detects structural fault locations by setting thousands of test points – even under BGAs – with only four test bus lines.
This machine has been designed to punch various materials, such as metal, flexible boards, and exposure film. The optional Matrix-robot feeds the work to the punching position as programmed and punch the target center. One-unit-structure of Punch & Die maintains high accuracy
The system measures the position, diameter and roughness of a drilled hole. It also can detect the shrinkage/expansion rate of PCB / Film
In this process panels are cleaned, flux coated before HAL and then panels are soldered after solder mask process then post cleaning is done.
Hot Air Solder Leveling Systems Lantronic Hot Air Solder Leveling Machines are built to the highest standard. Features of the machines are imple operation and maintenance procedures and there is a model to suit all sizes of manufacturers
The MFD2 series IDE Flash Disk is a storage device based on HYPERSTONE F2-16XN NAND type Flash controller. The module is fully compatible with IDE ATA standard interface, 44 pins connector. The MFD is free of firmware driver and it works like a normal Hard Disk Drive.
The Line Gauge system is specially designed for desktop use in order to measure conductor line widths, conductor line spaces, arcs, circles and other patterns on the PCB board. It can measure a conductor line width less than 1 mil.
Manage the cleanliness process with the easy to use FinnSonic V03 control system. Explore the flexible and affordable product range for maintenance and production.Modular MI Range is engineered for optimum cleaning result. The M Industrial ultrasonic stainless steel cleaning tanks are used as single-stage bench top units or as part of a fully integrated modular cleaning system.